Videx to display VAS-20-DBH and VA-20-ES 28 March 2016

Videx Machine Engineering Ltd is able to manufacture a wide variety of machinery, a selection of which will be on display at wire® 2016.

Machines that will be on Videx’s stand include the VAS-20-DBH, a fully automatic bolt bending machine from coil for the production of U-Bolts and eye bolts. The VAS-20-DBH is able to pull the wire from the coil, straighten it, cut to length, thread roll on both sides in a thread range from M6 – M12, and bend to shape.

Also on the stand will be the VA-20-ES planetary thread roller with closed structure for pre-hardened fasteners. The machine controls the feed position and indexes the feed cam to a fresh start point, thus considerably increasing die life. It is also equipped with Videx’s ‘Controlled Feed’ system, for threading lap-free threads on any material. Other features include hydraulic clamp of the thread rolling dies and quick set up features. The VA-20-ES offers a thread range from M6 – M16 and has a production speed of up to 640 parts per minute.

Other machines available from Videx include dual spindle thread rollers for straightening and thread rolling long hardened fasteners, thread and knurl wheel bolts and thread roll dual side fasteners; straighten and cut machines from coil with optional chamfering up to 45mm diameter; U-bolts, straight studs and eye-bolt machines from coil; as well as extrusion machines for bars up to 100mm diameter.

Content Director

Will Lowry Content Director t: +44 (0) 1727 743 888

Biog

Will joined Fastener + Fixing Magazine in 2007 and over the last 15 years has experienced every facet of the fastener sector - interviewing key figures within the industry and visiting leading companies and exhibitions around the globe.

Will manages the content strategy across all platforms and is the guardian for the high editorial standards that the Magazine is renowned.